Buying a used EV? Read the battery report before the price tag
A used EV can look immaculate and still leave its biggest question unanswered: how much energy can its battery hold today? A battery health report helps you look beyond the odometer and the dashboard range number.
Source snapshot: Checked 2 November 2026. Australian Government guidance, an Australian inspection service and test-provider documentation. Test coverage and methods differ; examples below are invented arithmetic, not results for a particular vehicle or a buying threshold.
- SoH ≠ chargeBattery health and the percentage charged answer different questions.
- Read the methodA dashboard estimate, BMS read-out and independent test are different evidence.
- Match the carCheck the VIN, test date and odometer before trusting the headline.
Imagine two similar EVs advertised at the same price. One seller sends a photo showing 100% charge; the other supplies a recent battery report for the car. Only the second starts to answer the battery-condition question. A full battery is not necessarily a battery with its original capacity.
The Australian Government recommends asking the seller or dealer for a battery health report when buying second-hand. State of Health (SoH) describes battery condition relative to new. State of Charge (SoC) describes how full it is now. Think of SoH as the size of the fuel tank, and SoC as how full that tank is.
1. What does 90% battery health mean?
If a report defines SoH as retained usable energy, 90% means its estimated usable capacity is 90% of the reference when new. Confirm that definition: a proprietary score out of 100 is not automatically a capacity percentage, and gross pack capacity is different from energy available to the driver.
Illustrative calculation: a battery with 60 kWh usable when new at 90% capacity-based SoH has about 54 kWh usable now. At an assumed 18 kWh/100 km, 54 ÷ 18 × 100 = 300 km from full to empty. Between 80% and 20% charge, that becomes 32.4 kWh, or 180 km under the same assumptions. These are simplified estimates, not safe distances to drive before charging.
A 90% result does not mean 90% of the battery’s years remain. Nor does it predict a replacement date. Ask whether the car’s current capacity suits your own regular journey and charging access.
2. Ask how the number was produced
The Government notes that onboard diagnostics and apps may show battery health, while an independent check may be preferable. Ask whether the report repeats the battery management system’s estimate, independently analyses diagnostic data, or measures energy over a driving/discharge test.
AVILOO distinguishes BMS read-outs from its independent diagnostics. Its certificate documentation describes pack and cell analysis, comparison with similar vehicles and a QR code for checking authenticity. These are the provider’s descriptions of its own service; they do not prove that every report, app or supported model offers the same checks.
Before booking, ask which test supports the exact model and battery variant, what preparation is required and what the result excludes. An unexplained number deserves a follow-up question, rather than an automatic pass or fail.
3. An Australian example: what a report can include
RACQ’s EV Battery Health Check lists SoH, same-model benchmarking, current versus original estimated range and usable-energy comparison among its report inclusions. It is a useful example of what to ask for, rather than a national standard for every inspection.
Treat any quoted range as an estimate. Ask what consumption assumption it uses. A result calculated from WLTP or previous average consumption may not represent your winter motorway trip.
4. A healthy-looking percentage is only part of the purchase
Keep the full report alongside a professional vehicle inspection, service history and charging-equipment checks. Follow up any battery warnings or unexplained findings with an EV-qualified technician. A battery report is a snapshot, not a guarantee of future reliability.
Check the warranty for this VIN and delivery date. For example, Tesla Australia lists minimum 70% capacity retention for specified models within their battery-warranty terms, and says coverage varies by model, trim and delivery date. A warranty threshold is not a recommended used-car buying target or an automatic entitlement based on a third-party report.
Your next step: send the seller this request before arranging the inspection — “Please provide the complete battery health report with VIN, odometer, test date, test method, usable capacity, any fault findings and remaining battery-warranty details.”
The report-reading checklist
Use these questions to evaluate the evidence. There is no universal SoH pass mark for every age, model and price.
| Compare | Look for | Ask if it is missing |
|---|---|---|
| Identity | VIN, battery variant, date and odometer | Does this report belong to the car being sold? |
| Meaning | SoH definition and usable kWh reference | Is this retained capacity or a different score? |
| Method | Provider, test type and stated limitations | What was measured, and what was estimated? |
| Findings | Fault flags and model comparison where available | Does anything need a technician’s follow-up? |
| Your trip | Capacity plus a realistic consumption assumption | Will it cover my route with a charging reserve? |
Frequently asked questions
Is a 100% charge screenshot a battery health report?
No. It shows the current charge level. Ask for evidence of battery condition and retained usable capacity.
Is 90% SoH good enough to buy?
There is no universal buying threshold. Read the test method, findings, age, price and warranty together, then check whether current usable capacity suits your journeys.
Related guide: Winter EV range: why the same battery can take you less far →
Sources and further reading
Planning note: This guide is general information. Use the calculators with your own vehicle, charging and cost inputs before making a decision.
← All guides